Product Description

DURMAPRESS® Laser cutting systems have developed into one of the most versatile and affordable metalworking tools. Today's fiber-optic lasers can cut ferrous and non-ferrous materials of different thicknesses utilizing only a photonic beam and assist gasses. Besides the excellent edge finish and high throughput fiber lasers offer blistering speed for thinner applications and high cutting capacities with greater kilowatts.DURMAPRESS® Fiber Laser Cutting System features extensive standard options including a shuttle table and available sizes for any metalworking need.

Standard  Components

• CYPCUT® CNC 17” SCREEN FSCUT2000 CNC Control System

• Fuji ® Highly dynamic EtherCAT servo drive

• RAYTOOLS ® Cutting head Auto Focus (Switzerland)

• DURMAPRESS® Dynamic System 4.0: 1.2G Acceleration

•  DURMAPRESS® Fast piercing 2.0: Ultrafast perforation

• Automatic table exchanger 3015(Optional 4020 / 6020)

• Graphite Anti-burn Technology

• Smoke extraction Fan system

• fiber laser resonator IPG 1000w 1500w 2000w 3000w

• Smoke extraction system (TODC-4L/4500m³/h).

• Class IV safety system and CE marking

• Fully automatic voltage regulator System

• CYPCUT ®Embedded PCs: Industrial PCs with directly integrated I/O level

 

The quality fiber laser sheet cutting machine affordable for everyone

Specially used for cutting 0.5-150 mm carbon steel, 0.5-40mm stainless steel, galvanized steel, electrolytic zinc-coated steel, silicon steel, 0.5-25mm aluminum, 0.5-12 mm brass and red copper and other kinds of thin metal sheets (The max thickness depends on the different power fiber laser source).

Advantages 

More efficiency and less power consumption

The increased electrical efficiency of fiber laser technology drastically slashes the electrical consumption of the system which means a monthly savings on your utility bills and a reduction in the initial investment in electrical equipment and services.

Superior performance on thinner materials

The faster speed of nitrogen fiber laser cutting on thin walled more than doubles machine productivity compared to CO₂: mild steel and medium thickness stainless steel are the materials that typically benefit the most from fiber laser technology.

No laser maintenance needed

The fiber laser does not require routine maintenance or rebuilding procedures. No laser gas is needed. Laser beam quality is stable over time and is available immediately upon start up.

New materials and new opportunities

Copper and brass, materials which were off-limits with CO₂technology can be easily cut with fiber laser. Even tricky to cut aluminum and galvanized steels have no limits. Fiber technology offers new opportunities and a more robust production method for difficult materials.

Stable Heavy-duty Welding Body

It adopts high-quality carbon steel sheet and three welding process and mortise-and-tenon joint structure, which make it firm enough to bear 500Mpa tensile force. The structure material undergoes high stress relief annealing and natural aging treatment to eliminate internal stress, so that the bed maintains good mechanical properties of good tensile properties, toughness, hardness, anti-deformation

Auto Focus Laser Cutting Head- Raytools Swiss

Model : FSCUT2000S
Control card :BMC2104
I/O terminal board: BCL3766
Motor control signal: X/Y1/Y2/W axes pulse output, maximum frequency 3MHz
                                                 X/Y1/Y2 axes port receive encoder feedback, highest sampling frequency 10MHz
                                                W axis port can be assigned as rotary axis or autofocus unit
Dedicated inputs: 8 limit inputs: +/-limit for X/Y1/Y2/W axes
                                          4 origin inputs: X / Y1 / Y2 / W axes origin signal inputs:
Common inputs:15 inputs: low-level active by default option, supports NO and NC mode. IN3~IN15 can switch between active low and active high
Software:CypCut Laser Cutting Control Software
Interface type:PCIE bus, X16, 250MB/S
Power supply:24V DC/2A
Work environment: Temperature: 0-55℃
                                              Humidity: 5%-95% (no condensation)
Dedicated outputs: 2 DA outputs: 0~10V，50mA
                                             1 PWM output: 5V/24V for option, precision of 50KHz (0.1%)
Common outputs:8 relay output, load capacity 250V AC/5A, 30V DC/5A
                                         12 thyristor output, load capacity DC 24V/500mA

Taiwan YYC Gear

 

Italy MOTOVARIO Reducer

Reduce noise and servo cost, maintain stableperformance, improve precision,reduce failurerate and extend service life of servo and equipment.
 

Japan Fuji Servo Motor