Metal laser cutting machine dust how should we clean?

Metal laser cutting machine This equipment, machining industry people are familiar with. Metal laser cutters can cut a wide range of materials. When choosing metal laser cutting machine, we must know our needs, not only need to know the cutting material, the thickness of the cutting, but also need to choose from the production and processing and the degree of material saving. When choosing a metal laser cutting machine, we should not only consider the needs of the present, but also consider the needs of the future. Now the choice of metal laser cutting machine can choose a wide range of applicability. It can be used for processing small pieces like small nameplates or it can be used for bulk processing and cutting whole boards. With the increasing of the fiber laser cutting machine, in the daily use of the process, it is inevitable to produce a lot of dust, over time, the machine will precipitate down, in order to better maintenance and maintenance of the machine, but also in order not to affect the processing of the machine, how should we clean the dust in the engraving machine?

1, first of all, the dust on the machine tool table of the metal laser cutting machine does not matter, any way to clean can be, but it is not recommended to clean the dust inside the machine, improper removal is easy to scratch the laser head, serious will lead to read and write data when the laser can not be accurately positioned.

2, secondly, as long as the dust does not fall on the surface of the laser head is not affected by the use of the most secure method is to put the metal laser cutting machine upside down (laser head down) with the blow balloon (a tool to clean the digital SLR CCD, very cheap) to blow the dust off.

3. In addition, special attention should be paid to the replacement of water and the cleaning of the water tank (it is recommended to clean the water tank and replace the circulating water once a week).

The dust of metal laser cutting machine mainly affects the heat dissipation of electronic components and the sensitivity of photosensitive elements. Common symptoms include optical inspection failure and CPU fan failure. So in addition to dust affecting the processing process of metal laser cutting machine, there are some factors that will affect it. What are the factors that affect the processing of metal laser cutting machine?

1. The power supply of metal laser cutting machine has the most direct influence on the processing, which is mainly manifested as the disorder of the control system. Each electronic device and function component of SMC control system have certain voltage and frequency range. The overload operation of any component will inevitably lead to the instability of the whole system, and the common phenomenon is machining offset.

2, the impact of the vibration of the metal laser cutting machine is reflected in the frequency of the broken knife, the surface is not smooth. The common reasons are that the machine tool is touched in the process of processing, the machine tool installation level is not qualified, and there is a punch around.

3, metal laser cutting machine generally will not appear the cutting tool tip and broken edge cause the engraving surface is not smooth, there is serration phenomenon. It is found that the engraving surface is not smooth and there is serrated phenomenon. We should first check whether the type size of the carving knife used is suitable. If the handle is extended too long, the knife will be deformed and increased at the processing time, which will lead to the processing surface is not smooth and serrated.

4, metal laser cutting machine environment temperature and humidity mainly affect the performance of the control system, the performance of the drive motor. When the ambient temperature exceeds 40 degrees, the control system may have incorrect control, and the drive torque of the drive motor may not reach the rated value.