• CYPCUT® CNC 17” SCREEN FSCUT3000 CNC Control System
• YASKAWA ® Highly dynamic EtherCAT servo drive
• RAYTOOLS ® Cutting head Auto Focus (Switzerland)
• DURMAPRESS® Dynamic System 4.0: 1.2G Acceleration
• DURMAPRESS® Fast piercing 2.0: Ultrafast perforation
• Automatic table exchanger 3015(Optional 4020 / 6020)
• Graphite Anti-burn Technology
• Smoke extraction Fan system
• fiber laser resonator IPG 1000w 1500w 2000w 3000w
• Smoke extraction system (TODC-4L/4500m³/h).
• Class IV safety system and CE marking
• Fully automatic voltage regulator System
• CYPCUT ®Embedded PCs: Industrial PCs with directly integrated I/O level
Specially used for cutting 0.5-150 mm carbon steel, 0.5-40mm stainless steel, galvanized steel, electrolytic zinc-coated steel, silicon steel, 0.5-25mm aluminum, 0.5-12 mm brass and red copper and other kinds of thin metal sheets (The max thickness depends on the different power fiber laser source).
The increased electrical efficiency of fiber laser technology drastically slashes the electrical consumption of the system which means a monthly savings on your utility bills and a reduction in the initial investment in electrical equipment and services.
The faster speed of nitrogen fiber laser cutting on thin walled more than doubles machine productivity compared to CO2: mild steel and medium thickness stainless steel are the materials that typically benefit the most from fiber laser technology.
The fiber laser does not require routine maintenance or rebuilding procedures. No laser gas is needed. Laser beam quality is stable over time and is available immediately upon start up.
Copper and brass, materials which were off-limits with CO2technology can be easily cut with fiber laser. Even tricky to cut aluminum and galvanized steels have no limits. Fiber technology offers new opportunities and a more robust production method for difficult materials.
It adopts high-quality carbon steel sheet and three welding process and mortise-and-tenon joint structure, which make it firm enough to bear 500Mpa tensile force. The structure material undergoes high stress relief annealing and natural aging treatment to eliminate internal stress, so that the bed maintains good mechanical properties of good tensile properties, toughness, hardness, anti-deformation
FSCUT3000S system is designed for tube cutting control, support standard tube(retangle, circle, oval, ellipse and obround etc.) , free form , and steel channels(T/U/H/L shape) production of high precision and efficiency.
It is specially designed for laser pipe and sheet cutting equipment. The product itself can be used as an independent rotating spindle, which can quickly clamp and loosen through the side rotating air intake, and the air source can be disconnected before it can work. After the product base is fixed, it is only necessary to install the matching motor and gear connection, and connect the compressed air source (0.25-0.9Mpa) to clamp the workpiece and drive the workpiece to rotate. Mainly used for clamping workpiece and rotating.
The product adopts the direct output of the cylinder, which has high mechanical efficiency, small energy loss, large output clamping force and stable clamping force. Because the cylinder is used to directly clamp the workpiece, the working stroke of the cylinder is the working stroke of the chuck, and the clamping range is wide. The direct output of the cylinder is adopted, and the output force and air pressure are linearly proportional, which is easy to realize software control.
The chuck has simple structure, small number of components, light weight, low failure rate, stable performance, small moment of inertia and low energy consumption. The axial size of the chuck is small, and the cost of achieving zero tailings is lower.
Includes Following Features And Properties
Optional Laser Source
|Model||BS-E Series||BS-E Pro Series|
|Working Area (L*W)||3000*1500mm/ 4000*2000mm/ 6000*1500mm/ 6000*2500mm||3000*1500mm/ 4000*2000mm/ 6000*1500mm/ 6000*2500mm/ 8000*2500mm|
|Laser Power||2000W/ 3000W/4000W/6000W||3000W/ 4000W/ 6000W/ 8000W|
|X/Y Axis Positioning Accuracy||0.05mm||0.05mm|
|X/Y Axis Repositioning Accuracy||0.03mm||0.03mm|
|Max. Linkage Speed||65m/min||100m/min|
|Max. Acceleration||0.8G||1.0G/ 1.5G/ 2.0G|
|Effective Round Tube Cutting Diameter||φ20-φ210mm|
|Effective Square Tube Cutting Diameter||□20-□150mm|