E-mail Us: info@durmapress.com

CNC bending machine operation attention and CNC bending machine die installation elements?

Views:3     Author:DURMAPRESS     Publish Time: 2021-10-08      Origin:DURMAPRESS Inquire

CNC bending machine operation attention and CNC bending machine die installation elements?

With the continuous improvement of industrial automation, more and more manufacturers choose to buy CNC bending machine, CNC shearing machine and other sheet metal equipment with automatic intelligent energy CNC system. Different CNC systems for different standards of product production, the price difference is also very large, so for manufacturers, the correct choice of CNC system can effectively help the mass production of products.

CNC bending machine Safe operation specification

1. The operator must be familiar with the general structure and performance of the equipment.

2, the lubrication part of the bending machine should be regularly refueled.

3. Idling before bending can be operated only after checking that the equipment is normal.

4. Do not drive when installing the bending mold.

5, the correct choice of bending mold, upper and lower die fastening position should be correct, installation of upper and lower die operation to prevent trauma.

6, bending is not allowed to pile up debris and work, measuring tools between the upper and lower molds.

7. In case of multi-person operation, the main operator shall be confirmed and the main operator shall control the use of foot switch, and other personnel shall not use it.

8, large parts bending, to prevent the plate surface injury.

Controller 2

9, bending machine abnormal immediately cut off the power, stop the operation, inform the relevant personnel to troubleshoot in time.

10. After completion, stop the upper tool to the lower dead point, cut off the power supply and clean up the working site.

CNC bending machine mold is composed of a lot of parts, so when installing, we must check the state of the equipment, and strictly follow the steps, at the same time, pay attention to safety when installing and debugging, CNC bending machine mold installation and debugging process. So, what are the precautions in the installation and debugging process of CNC bending machine mold?

1, Wuxi Shenchong believes that in the adjustment of the machine, before the installation, the first thing to adjust the machine performance, this process must be patient and serious, check the machine is not dust and used iron debris, etc., necessary cleaning, in order to reduce the trouble in the later period.

2. Adjust the stroke of the slider, pay attention to check the thickness of the mold and check whether the proportion of the upper and lower modules is normal. Normally, the module should be controlled at the switch point of the stroke line, which must be paid attention to.

光栅尺

3. Adjustment of the travel module, that is, adjustment of the upper limit point of the module, when the module is at the top, set the switch well, and reserve the stopping position of the slider, and decelerate the module in the next line, so as to better protect the machine and the mold

4. The adjustment of the gap is mainly to measure the distance between the upper module and the lower module first. The specific clearance setting is determined according to the plate folded.

5, the Angle adjustment, the Angle adjustment has a certain relationship with the product, generally folding 90° mold, then the middle Angle must be greater than the Angle of both sides, then its tightness can be carried out according to the adjustment screw, when bending, can be adjusted through the pressure gauge, to avoid the die edge collapse.


Contact Us Now l Get Reply Within 1 Hour!

With no distractions and keep focus, we strive to improve our products, lead the way of innovation…
View More >

CONTACT US

 0086 555 8327689

 +86 18325572889

 info@durmapress.com

FOLLOW US


SCAN  WECHAT

Copyright 2020 Maanshan Durmapress Machinery Technology Co., ltd. All rights reserved. Support by Leadong.com

SEND MESSAGE