E-mail Us: info@durmapress.com

CNC plasma cutting machine manufacturers operating guide

Views:0     Author:DURMAPRESS     Publish Time: 2021-03-12      Origin:DURMAPRESS Inquire

CNC plasma cutting machine manufacturers operating guide

At present, there are two brands in the gantry plasma cutting machine market, one is a domestic brand, one is a foreign brand.In these two kinds of brands CNC plasma cutting machine general foreign brands than the domestic brand prices are generally on the high side, generally in 70 thousand to 100 thousand.But the gantry CNC plasma cutting machine manufacturers  products of foreign brands are generally better than domestic product quality is a lot better, but this foreign products are not all parts are produced abroad, only a part of the important parts are produced abroad, and then handed over to the Chinese manufacturers for processing

Hubei numerical control plasma cutting machine operation to ensure safety under the premise of attention to the correct use of Hubei numerical control plasma cutting machine, the following Hubei numerical control plasma cutting machine operation manual for a brief introduction.

(1) Transfer the drawn or existing correct CAD(DWG format) files into FastCAM nesting software on the computer;

微信图片_20200430112954

(2) Arrange the version according to the actual number of required workpieces in the netting software, pay attention to the thermal deformation stress of the plate during cutting, adjust the position of the starting lead of cutting, reduce the amount of deformation, convert the file into NC format file code after no error, and store it in the U disk carried randomly;

(three) open the power supply of CNC plasma cutting machine in Hubei, move the head to the position that does not interfere with the placement of the plate, place the plate as flat as possible with the track, put the plate will move the head to the lower left corner of the starting cutting point, remove the coordinates of the machine tool;

(four) check the gas and protective gas pressure of CNC plasma cutting machine in Hubei, whether there is damage to the air pipe, whether the air pipe joint leaks, check the cutting mouth, open the preheating oxygen ignition after the completion of the inspection,

Debug the flame size according to experience and plate thickness, clean up flammable objects near CNC plasma cutting machine in Hubei, and use epitaxial perforation to start preheating;

微信图片_20200430162121

(five) CNC plasma cutting machine in the cutting process, Hubei CNC plasma cutting machine meets the plate is not smooth at any time to adjust the cutting mouth height, if the use of small gas tank, in Hubei CNC plasma cutting machine cutting to observe the gas pressure gauge at any time, to prevent the lack of gas;

(six) CNC plasma cutting machine after the completion of cutting, CNC cutting machine manufacturers use professional tools to remove the cutting workpiece, clean up residual slag, pay attention to prevent burns;

CNC plasma cutting machine, Hubei CNC plasma cutting machine cutting when the operator must observe the cutting machine at any time, to prevent fire safety accidents.


Contact Us Now l Get Reply Within 1 Hour!

With no distractions and keep focus, we strive to improve our products, lead the way of innovation…
View More >

CONTACT US

 0086 555 8327689

 +86 18325572889

 info@durmapress.com

FOLLOW US


SCAN  WECHAT

Copyright 2020 Maanshan Durmapress Machinery Technology Co., ltd. All rights reserved. Support by Leadong.com

SEND MESSAGE