commonly used parameters and characteristics

200 tons of bending machine models, including WC67Y-200x3200 hydraulic bending machine is one of the more commonly used, also known as 200 tons of hydraulic bending machine, can fold 3.2 meters long plate, is a commonly used bending machine equipment. The equipment is based on the principle of hydraulic transmission, the implementation of components (cylinder and plunger or piston) simple structure, structure is easy to complete a large task pressure, large task space and long task stroke, so the compliance is strong, easy to suppress large workpiece or longer and higher workpiece.

200 tons WC67Y-200x3200 hydraulic bending machine common parameters:

1, thickness: edit the thickness of the sheet material.

2, material 1 for cold plate 2 for aluminum 3 galvanized plate 4 stainless steel plate 5 custom plate 6 custom plate;

3, bending method: select the required bending method, 200 tons bending machine WC67Y-200x3200 hydraulic bending machine system supports 4 kinds of bending method;

4. Bending length: the length of the programmed bending plate;

5. Y-axis: the Y-axis value programmed or calculated for a certain Angle.

6. Speed transfer point: the position when Y axis changes from fast down speed to working forward speed. It's set to a y-position value here. Edit value is Y axis position above bending sheet material.

7. The difference between left and right cylinders (Y1, Y2) of parallelism. When this parameter is positive, the right cylinder is lower than the left cylinder. If this parameter is negative, the right cylinder is higher than the left cylinder. The set value is valid below the clamping point.

8, opening: due to 200 tons of bending machine WC67Y-200x3200 hydraulic bending machine bending, between the upper die and the lower die will produce a certain gap opening. A positive value indicates that the gap opening is above the speed transition point, while a negative value indicates that the gap opening is below the speed transition point. When users want to limit the processing time of an artifact, they can set a small positive or negative value.

9. Waiting for concession: In case of concession, it is necessary to choose whether to make the Y-axis wait until the concession operation is completed. 0= No: when backing down, the Y-axis does not wait for the position of backing down, but directly comes down; 1= Yes: When backing down, the Y-axis waits for the position of backing down before the slider comes down.

10, 200 tons bending machine WC67Y-200x3200 hydraulic bending machine mold: the name of the selected mold (ID), click the relevant mold in the mold library to select or modify.

11, 200 tons bending machine WC67Y-200x3200 hydraulic bending machine lower die: select the name of the lower die (ID), click in the lower die library to select or modify.

12. Retreat: the retreat distance of the shaft in the bending process, and the retaining material begins to retreat at the clamping point.

200 tons bending machine WC67Y-200x3200 hydraulic bending machine center of gravity is high, before and after the light, so in lifting and installation should pay attention to the center of gravity position, so as not to cause machine turning over accident, lifting, lifting wire Angle to be as small as possible to ensure the accuracy of the machine tool. This 200 ton bending machine WC67Y-200x3200 hydraulic bending machine designed and produced by Shandong Weili Heavy Industry adopts traditional mechanical block structure, which is stable, safe and reliable. Slider stroke for quick adjustment of maneuvering ability, manual fine tuning, counter data display. Hydraulically driven, the machine carries out both ends of the cylinder mounted on a slider, direct investment drive sliding related work. Wedge deflection compensation mechanism ensures higher bending accuracy.