Extensive application and parameters of Q35Y-16 Hydraulic Ironworker

Is a combination of metal cutting, punching, shearing plate, bending and other functions of the machine tool equipment, with simple operation,

It has the advantages of low energy consumption and low maintenance cost. It is a modern manufacturing industry (such as metallurgy, bridge, communication, electric power,

Metalworking -- equipment.

At present, there are two kinds of double linkage Q35Y-30 Hydraulic Ironworker

 and common Q35Y-16 Hydraulic Ironworker:

Double linkage combined punching and shearing machine: multi-station working at the same time, intelligent temperature control cooling system, automatic pressing shear;

Common type combined punching and shearing machine: single position work, no cooling system, manual material pressing shear;

The combined punching and shearing machine is widely used in:

1. Steel structure processing

2. Elevator car and parts processing

3. Trailer -- spare tire parts, trailer hinge, plate hook, socket, tile plate

4. Construction machinery industry -- belt machine, mixing station on the processing

5. Agricultural and animal husbandry machinery industry -- thresher frame body, trailer bucket parts processing

6. Food industry machinery - slaughtering equipment frame and parts processing

7. High and low voltage tower parts processing

8. Wind power generation equipment -- parts processing for stairs and pedals on wind power towers

9. Mechanical processing -- processing of building embedded parts/conveyor supports and other parts that play a connecting role

10. Food machinery - grain and oil equipment starch equipment support, shell, small processing 

11. Railway truck/automobile, crane parts processing

12 channel steel, square steel, round steel, H steel, I-steel and other steel shear, punching, bending

◆ Technical parameters:

Model Q35Y-16 Q35Y-20 Q35Y-25 Q35Y-30

Thrust pressure (ton) 65 90 120 160

Shearable -- plate thickness (mm) 16 20 25 30

Sheet strength (Newton/mm 2) ≤450 ≤450 ≤450 ≤450 ≤450 ≤450

Shear Angle 7° 8° 8° 8°

One stroke shear plate size (thickness * width)(mm) 16*250 20*330 25*330 30*355

8 * 10 400 * 480 * 600 * 600 20 16

Slider travel 80, 80, 80, 80

Number of trips (times/min) 8 8 6 6

Throat mouth --(mm) 300 355 400 600

Punch thickness (mm) 16 20 25 26

-- Punch diameter (mm) 25 30 35 38

Main motor power (kW) 4 5.5 7.5 11

Dimensions (length * width * height) mm 1640*730*1770 1860*800*1900 2355*960*2090 2680*1040*2300

Machine weight (kg) 1700 2000 4800 6800

Steel types

Round steel square steel equilateral Angle T - shaped channel steel

90 degree shear 45 degree shear

90 degree shear 45 degree shear

section

Q35-16 45 40*40 125*125*12 100*100*10 125*12 100*100*10 180*94*6.5 180*68*7

Q35Y-16 45 40*40 125*125*12 50*50*5 120*120*12 60*60*8 126*74*5 126*53*5.5

Q35Y-20 50 50 50 50 140*140*12 50*50*5 140*140*12 70*70*10 160*86*6 160*60*6.5

q35y-25 60 50*50 160*160*14 50*50*5 160*160*14 80*80*10 200*102*9 210*75*9

Q35Y-30 65 55*55 180*180*16 60*60*6 180*180*16 80*80*10 280*124*10.5 280*86*11.5

Q35Y-30 65 55*55 180*180*16 60*60*6 180*180*16 80*80*10 280*124*10.5 280*86*11.5

Operating rules for hydraulic combined punching and shearing machine

1. Before starting the machine, check whether the transmission parts of the punching and shearing machine and the connecting screw pin shaft are loose and whether the electrical grounding is intact.

2. Lubricate each part before work. After two or three minutes of trial running, it can be put into work.

3. Overload is not allowed. Punching and shearing of hardened steel are strictly prohibited.

4, work should wear gloves and wear good labor protection supplies, sandals and slippers are strictly prohibited.

5. When punching shear, we should often refuel the punching tool to strictly prevent the skew of the upper and lower punching tool.

6. Pay attention to the safety of fingers when feeding. When the sheet material is rushed to the foot, it is forbidden to punch and shear.

7. When starting the machine, it is strictly prohibited to disassemble and proofread the cutting edge and punching die. It is not allowed to force high punching die, cutting edge and other parts.

8. Strictly control the specification range of the sheet material, and strictly forbid punching and shearing when it exceeds.

9, the workplace shall not accumulate other items and a large number of punching material, adjustment and cleaning must be shut down.

10. Stop the machine and clean up the scene when the work is finished.