Site icon DurmaPress

How to measure the quality of fiber laser cutting machine 10000w & temperature

How to measure the quality of fiber laser cutting machine 10000w & temperature

1. Cutting surface roughness Rz

 

2. Size of slag hanging from incision

 

3. Verticality and slope u of the cutting edge

 

4. Cutting edge circle Angle dimension R

 

5. Stripe trailing amount N  F

 

We all know that whatever is used properly needs certain environmental conditions. Laser cutting machine as a machine tool equipment, to normal operation is a certain temperature condition requirements.

 

In general, the key parts of CNC machinery is the CNC system, its working environment is generally between 5 degrees to 70 degrees, in this temperature range, high temperature than low temperature on the laser cutting machine impact is small, the temperature is too low, easy to cause trachea and cable fracture, leakage and contact fault!

 

For the drive of the laser cutting machine, the temperature has little effect, because the laser cutting machine rarely uses liquid lubricating oil, so there will be no freezing, we do not have to worry about the temperature. But in any case, if the conditions or to ensure that the workshop temperature is better than 0 degrees, should not be too low, because long-term low temperature work, easy to cause mechanical wear is too large, premature aging!

 

But also want to note that when using the laser cutting machine temperature is unfavorable and exorbitant, because will affect the control of CNC system, causing crashes, the problem such as slow response, therefore, want to let the laser cutting machine to play out the normal cutting result and cutting quality, maintain the proper temperature is very important, that will also extend the service life of laser cutting machine. Therefore, the operator must pay more attention to this aspect.

 

 

 

Exit mobile version