LCD screen laser cutting machine operation 13 small details

LCD screen laser cutting machine equipment in the work, if the failure is very dangerous, novice must go through professional training to operate independently.

1. Comply with the general safety operation rules of the cutting machine. Start the laser in strict accordance with the laser startup procedure.

2. The operator shall be trained, familiar with the structure and performance of the equipment, and master the relevant knowledge of the operating system.

3. Wear protective equipment according to regulations, and wear protective glasses in the vicinity of the laser beam.

4. Do not process a material before it is clear whether it can be irradiated or heated by laser, so as to avoid the potential danger of smoke and vapor.

5. When the equipment is started, the operator shall not leave the post without permission or ask someone to wait for the tube. If it is really necessary to leave, the machine should stop or cut off the power switch.

6. Keep fire extinguishers within easy reach; When not processing to turn off the laser or light brake; Do not place paper, cloth or other flammable materials near unprotected laser beams.

7. If any abnormality is found in the process of processing, stop the machine immediately, troubleshoot or report to the supervisor in time.

8. Keep the laser, the bed and the surrounding site clean, orderly and free of oil, and the workpiece, plate and waste materials are stacked according to the regulations.

9. When using gas cylinders, the welding wires should be avoided to avoid electric leakage accidents. The use and transportation of gas cylinders shall comply with the supervision regulations of gas cylinders. Do not expose gas cylinders to sunlight or close to heat sources. When opening the bottle valve, the operator must stand at the side of the bottle nozzle.

10. Follow high pressure safety procedures during maintenance. Follow the rules and procedures for every 40 hours of operation or weekly maintenance, every 1000 hours of operation or every 6 months of maintenance.

11. After starting the machine, manually start the machine in X and Y directions at low speeds to check whether there is any abnormal situation.

12. After the input of the new workpiece program, trial run should be conducted first, and check its operation.

13. When working, pay attention to the operation of the machine to avoid the cutting machine out of the effective travel range or two collision caused by accidents.

In the process of using the laser cutting machine, if you want to be able to play its advantage, do not violate the rules of operation, it will be very easy to affect the service life of the laser cutting machine, and it is easy to endanger the life safety of the staff.

Only in this way can:

1. Make the cutting work smoother

Through the use of laser cutting machine to complete the cutting work, can make the whole work process become more simple, especially can make the work efficiency faster, the most important is in the operation and use of high security, will not cause any harm to the staff, cutting precision can reach a higher standard, cutting surface will be more smooth will not cause any waste of materials, Products can reach higher end standards once they leave the factory.

2. Very high security

The staff will feel the efficiency is very fast when using the operation, and the overall cutting process will not be particularly painful, so the safety and stability can reach a higher standard, the premise is that we must be in professional and regular manufacturers to buy, so as to have a good brand quality assurance, especially for some difficult cutting work to bring better protection, The staff don't have to worry at all when they use it.