Ma anshan Anger notching machine use and characteristics

Views: 3     Author: DURMAPRESS     Publish Time: 2021-08-26      Origin: DURMAPRESS


Ma anshan Anger notching machine use and characteristics

Ma anshan Anger notching machine  use and characteristics

Oil and gas tanks and high pressure water washing are the same method. Generally, the punching and shearing machines of different manufacturers are used. The high pressure water washing produced by manufacturers should be processed safely in product specifications and standards. Small punching and shearing machine (high pressure water washer), is a sealed high pressure water washing device, directly placed on the washer with water.

The Angle steel channel punching and shearing machine in the Angle steel punching and shearing system in the application field is very wide, it is widely used in the automobile industry. Areas of application: automobile industry aluminum alloy mold punching and shearing machine design principles: principle of punching and shearing machine mold design and optimization according to the shape of the punching and shearing compactions, automatically adjust mould rotation range, mould replacement accessories at the same time, because of the difference of Angle changing workpiece size, shape and drive fibre elastic modulus reached the standard of before punching and shearing.

When punching, do proper treatment after punching. There are two forms of punching water flow: mouth and square, and there are new and old forms. Mouth punching is to disperse the punching force, because to destroy the punching device, it is necessary to destroy the transitional cavity first, destroy all the fragments in the container, and achieve punching must be properly processed.


Ma anshan Anger notching machine use and characteristics

Is the use of low cost, can set the aperture of small mechanical method, the workpiece completely hole forming equipment. Punching machine is not only used in long hole punching, used in large hole punching, Angle iron punching, bolt punching and rotor punching and so on. The basic principle of punching machine: punching machine by the handle, water pressure cutting mechanism, punching mechanism, ground oil and water mixture, impact type ***, plate shaft, connection handle and so on. Punching machine main working principle: fluid punching machine using too much gas will be squeezed out of the punching slot, in order to reduce the residence time of this material in the fluid.

The steel pipe punching process has a huge market potential because of its easy mold forming quality and high production efficiency.

According to the base wall panel side distance punching shear front two, front four, reverse four. Fixed with right Angle steel tube glue machine. Clamp bolts for securing the all-in-one machine. Nuts must be of the same material. Ii. Pipe fixation pay attention to the connection mode with flange bolts. If the flange is fixed with flat sleeve, only the flange sleeve can be used. Flange bolt connection of pipe hanging belt. If the pipe is fixed with flat groove casing, only the flat groove casing can be used.


Contact Us




 0086 555 8327689

 +86 18325572889




Copyright 2021 Maanshan Durmapress Machinery Technology Co., ltd. All rights reserved