Matters needing attention during operation of electro-hydraulic CNC bending machine

Now is the era of mechanization, the company or the factory of machinery and equipment is also more and more, in order to improve the efficiency of our machine, prolong the service life of equipment, reduce the cost of machine maintenance, each company needs to develop some effective maintenance rules, of course, the electro-hydraulic CNC bending machine can not escape. So what should we pay attention to when using electro-hydraulic CNC bending machine? The following are some details:

First, when we use the machine to regular maintenance, to ensure normal operation.

Two, electro-hydraulic CNC bending machine in use when the control panel switch open, adjust the travel distance, test run and then normal into production.

Three, regular of electric hydraulic CNC bending machine injection of lubricating oil, and check the oil level of gas per week, timely supplement hydraulic oil, and to ensure that the hydraulic oil clean, prohibit any impurities into the fuel tank, regular cleaning to replace the filter on the electric hydraulic CNC bending machine, and check whether there is any abnormal situation on the machine, if there is a loose switch or device such as screws.

Four, operators must strictly comply with the safety operation provisions of CNC bending machine tools, and wear labor protection equipment as required.

5. When the machine is running, it is forbidden to stretch your hand or body into the machine to check the bending of the workpiece, nor to stand behind the machine

Six, regular training of personnel, to eliminate casualties.

Many production workshops are using the bending machine, but when using the bending machine, do you know the steps of the safety specification? In the actual use of the process and need to pay attention to what problems? Today, I will briefly introduce the specific use of the bending machine and the matters needing attention. I hope it will be useful to you.

First of all, we turn on the power supply of the bending machine, and then start the oil pump. After this series of operations are completed, the oil pump starts its own work. The machine does not need to move.

Second is the stroke adjustment: bending machine to the bottom, to ensure that there is a certain distance, if not a distance, will cause damage to the machine. It can be adjusted electrically or manually. But the use of bending machine must pay attention to stroke adjustment.

Finally, choose the notch of the bending machine: generally, there is a multiple relationship between the length and width of the notch plate thickness. Such as bending 4 mm sheet metal, need about 32 mm bending machine under the mold V notch. The rear stopper can be adjusted electrically or manually.

When the bending machine is used, it is necessary to open the foot switch to bend, it can be loosened at any time, it can also stop at any time, and it can continue to go down after stepping on it. In other words, you can control the downlink of the bending machine at any time. Therefore, the operation of the bending machine is more convenient, which is not a difficult thing for people, through the correct use, in order to better maintain the bending machine, so that the bending machine can have a longer life.

Through the introduction of the above steps of using the bending machine, we should know a lot about the bending machine, and should pay more attention to its maintenance when using it at ordinary times, so as to use it for a longer time. 

Is used in contact with the metal bending machine mainly composed of three parts, including the workbench, plywood and support this several parts, the bending machine area is not large, so don't worry about it will affect other work procedures, the device can also provide higher power support, during the period of use can be accurate bending plate to a certain point of view, Now bending machine began to get the attention of users, the number of bending machine manufacturers on the market also began to increase, and when buying equipment, should understand the correct maintenance method of bending machine. Today we bending machine technology xiaobian to give you talk about the topic of bending machine.

Any kind of mechanical equipment in the running for a period of time are prone to different degrees after aging and wear and tear, if people can pay attention to the maintenance of equipment at ordinary times, can avoid a lot of problem, then, in the use of bending machine is the same, the staff through bending vendors would buy equipment, should first understand the characteristics of the production technology and equipment performance, Also want to ask good maintenance method at the same time.

Hydraulic parts are one of the components of the bending machine. Hydraulic parts need to be cleaned regularly. Generally, the bending machine manufacturer will recommend people to clean once a month, but the specific time arrangement should be combined with the operation of the equipment. The benefits of cleaning hydraulic components are many. During the cleaning process, dirt can be prevented from entering the system and blocking can also be prevented.

Bending machine manufacturers should also pay attention to the purchase of equipment, different models and sizes of equipment during the maintenance of operation methods and skills also exist certain differences, in order to make the bending machine during the work can achieve a more stable state, the need to master the correct maintenance knowledge.