E-mail Us: info@durmapress.com

FACTORY SHOW

News Center

  • 2020-04-28

    From the advent of the metal laser cutting machine to the present, it has been gradually recognized by the vast number of consumers, so what are the advantages of the traditional cutting method that can not be compared with the laser cutting machine?First let us look at the characteristics of laser

  • 2020-04-28

    Laser technology is one of the great inventions of the 20th century. Since the first laser was introduced in 1960, solid-state lasers, gas lasers, semiconductor lasers, and excimer lasers have been born. The laser is different from the ordinary light source. It has good monochromaticity and coherenc

  • 2020-04-28

    A bending machine is a machine that can bend a thin plate. When in use, the coil is energized by a wire, and after being energized, it generates a gravitational force on the pressing plate, thereby realizing the clamping of the thin plate between the pressing plate and the base.The modern bending ma

  • 2020-04-28

    1: Introduction to the main performance of DA58T system2: DA58T system port introduction3: DA58T system diagnosis function operation4: DA58T system PLC import operation5: Meaning of Y-axis parameters of DA58T system6: DA58T system manual interface operation and common faults7: Introduction to PLC di

  • 2020-04-27

    When using a CNC bending machine for work, there may be some use errors. At this time, it is necessary to pay attention to it. If there is a problem with the bending machine, it should be checked. The first step of the inspection is whether the mold used by the bending machine is worn or damaged. If

  • 2020-04-27

    The way of press brakes controller return to the reference point can be divided into thefollowing:1. When returning to the origin point manually, the homing axis is moved to the origin by therapid traverse speed set by the parameter;When the slow down switch of origin point is pressed by slow down b

  • 2020-04-27

    Both E21 and E200P press brake controller are from China's Estun company.The difference between these two controllers are as follows:

  • 2020-04-27

    Press brake is a kind of widely used bending machine, which has already achieved hydraulic efficiency.Press brake, as important equipment for sheet metal processing, plays anirreplaceable role. It plays a decisive role in product quality, processingefficiency and precision.Usually, the press brake i

  • 2020-04-27

    With the continuous improvement of industrial automation, more and more manufacturers choose to buy sheet metal equipment (such as CNC bending machine and CNC shearing machine) with an automatic intelligent CNC system.Different CNC systems are suitable for the production of different standard produc

  • 2020-04-27

    However, do you know why such a bending machine is been called“pressbrake"?This question also confused me for quite a long period of time. Sometimes |even wondering does this term really right to define the hydraulic bendingmachine.After doing some homework, now | finally know why it's been called "

  • Total 11 pages  Go to Page
  • Go

Contact Us Now l Get Reply Within 1 Hour!

With no distractions and keep focus, we strive to improve our products, lead the way of innovation…
View More >

CONTACT US

 0086 555 8327689

 +86 18325572889

 info@durmapress.com

FOLLOW US


SCAN  WECHAT

Copyright 2020 Maanshan Durmapress Machinery Technology Co., ltd. All rights reserved. Support by Leadong.com

SEND MESSAGE