E-mail Us: info@durmapress.com

FACTORY SHOW

News Center

  • 2020-07-08

    A. Calculation of working tonnage of bending machineDuring the bending process, the force between the upper and lower dies is applied to the material, causing the material to plastically deform. Working tonnage refers to the bending pressure during bending.The influencing factors for determining the

  • 2020-07-08

    1. Bending is the most important link in sheet metal manufacturing. The quality of the bending will directly affect the production of the next process and the quality of the entire product. The rationality of the bending method will directly affect the processing cost. First we must understand the c

  • 2020-07-07

    Safety management regulations for punching, shearing and notching machineryIn order to strengthen the safety management of hedging and shearing machinery and ensure personal safety, this system is specially formulated. basic requirements1. The purchase, installation and acceptance of stamping machin

  • 2020-07-07

    First, let's talk about ordinary bending machines, that is, non-CNC bending machines, usually we call them ordinary machines. General machine tool manufacturers can produce all kinds of CNC bending machines, but the quality of ordinary machines can best represent the ingenuity of an enterprise. 1 Ma

  • 2020-07-06

    In the process of using CNC laser cutting machine, we often produce some dust and affect our eyes. For safety reasons, we recommend that dust removal equipment must be installed, which is good for human health and machines. It is recommended that you master the following three points, which can have

  • 2020-07-06

    The following briefly introduces the characteristics of the three laser cutting machines:The first type YAG solid laser cutting machineYAG solid laser cutting machine has the characteristics of low price and good stability, but the energy efficiency is generally less than 3%. The output power of the

  • 2020-06-29

    Keywords: Electro-hydraulic synchronous bending machineAmong the many types of bending machines, according to the different power operation modes, they can be divided into several types. Among them, the electro-hydraulic bending machine is one of the more used ones, and this bending machine can cont

  • 2020-06-19

    There are many brand manufacturers of fiber laser cutting machines. There are many factors that need to be considered when purchasing such large-scale and high-tech products. A little care will cause a greater impact on production. If the quality of the equipment is unstable and After-sales is not t

  • 2020-06-19

    Lasers have applications in teaching, military, and industry. Laser cutting machine is one of its applications. Laser cutting machines are used for cutting metal and non-metal. The laser beam melts the surface of the material. This article will describe the principle of laser cutting machine.The pri

  • 2020-06-19

    Technical SpecificationsLaser power3000W IPG Fiber Laser Cutting MachineLaser sourceGermany IPG fiber laser resonatorProcessing surface(L × W)3000mm x 1500mmCNC controlShanghai FISCUT CypCutLaser headSwitzerland RaytoolsPower supplyAC380V±5% 50/60Hz (3 phase)Total electric power32KWPosition accuracy

  • Total 16 pages  Go to Page
  • Go

Contact Us Now l Get Reply Within 1 Hour!

With no distractions and keep focus, we strive to improve our products, lead the way of innovation…
View More >

CONTACT US

 0086 555 8327689

 +86 18325572889

 info@durmapress.com

FOLLOW US


SCAN  WECHAT

Copyright 2020 Maanshan Durmapress Machinery Technology Co., ltd. All rights reserved. Support by Leadong.com

SEND MESSAGE