There are many kinds of hydraulic system failures. Some of these failures are caused by the failure of a hydraulic component. Some are caused by the combination of multiple components in the system; Some are caused by improper selection of hydraulic oil and hydraulic oil pollution; Some are also cau

Reduce gasket adjustment and shorten preparation time. For example, hydraulic bending machines, which use 1/2 inch (0.0127 m) and meter jaws to form mild steel, have a bending radius of about 0.078 inch. During bending, die holes should be spaced 8 times the thickness of the metal material. If the s

JB/T2257.1-1992 "WC67Y hydraulic sheet bending machine technical conditions";GB/T14349-1993 "bending machine accuracy";JB10148/1999 "hydraulic sheet bending machine safety technical conditions";GB5226.1-2002 "mechanical safety, electrical equipment general technical conditions".In order to formula

Fabrication of plate metals is the irreplaceable component of mechanical treatment in such areas as automobile, aviation, elevator as well as household devices. Bending is the key procedure while working out plate metals the quality of which has a direct effect on shaping dimensions and the form of