Performance analysis of pendulum plate shears and gate plate shears?

Hydraulic plate shearing machine is divided into hydraulic pendulum type plate shearing machine and hydraulic gate type plate shearing machine according to the movement mode of the tool rest. In order to let everyone know more about the performance of the plate shearing machine, the following Shandong Wei Heavy Industry plate shearing machine manufacturer discusses in detail the performance of the pendulum type plate shearing machine and gate type plate shearing machine from four aspects.

First, in terms of structural parts, because the pendulum shear structure is simpler than the brake shear structure, the failure rate is low, the stability is good, and the use and maintenance are simple.

Second, in terms of the shear Angle, the shear Angle of the pendulum shear is not adjustable,and the brake shear is adjustable. The maximum shear Angle of brake shears is generally greater than that of pendulum shears. Therefore, the total number of travel, pendulum shear is more than the brake shear, but when the shear is less than the maximum thickness of the shear plate, the shear Angle of the brake shear can be adjusted smaller, the number of shear is still variable, and when the shear is narrow, the small shear Angle can reduce the distortion of the cut bar.

Third, as far as the blade of the plate shearing machine is concerned, the upper and lower blades of the pendulum shears are different. Only two cutting edges of the upper and lower blades of the brake shears can be used for cutting. The upper and lower blades of the brake shears are the same, and there are four cutting edges available.

Fourth, as far as the length is concerned, the pendulum shear is limited by the structure, and it is more difficult to design and process the thick and long shear plate shearing machine, and the brake shearing is not affected by this. Now the large plate shears are generally for the brake shear.

Whether it is pendulum shear or brake shear, we pay attention to quality management to ensure that each machine is the choice of customer satisfaction. It is generally recommended that if you cut less than 8 thick plate with pendulum plate shears, more than 8 thick plate with gate type plate shears.

Buy hydraulic shears need to pay attention to what problems?

Hydraulic plate shearing machine is now the plate shearing industry cost-effective equipment, a little know the hydraulic plate shearing machine is divided into hydraulic gate type plate shearing machine and hydraulic pendulum type plate shearing machine, so for the first purchase of hydraulic plate shearing machine customers, purchase equipment need to pay attention to what problems?

1, to determine the model of the purchase of the machine, in the purchase of the need to take into account the expansion of the scale of the enterprise after leaving a certain margin to determine the model of the machine. After determining the model of the machine, learn more about the use of the machine tools purchased around, the quality of the machine, especially the after-sales service and so on.

2. The price of hydraulic plate shears. The production of hydraulic plate shears on the market many manufacturers, different manufacturers of production process standards, the price is also different, the price is too high over budget, the price is too low quality is not up to standard, therefore, we suggest that the middle price of hydraulic plate shears to investigate the test machine.

3. After-sales service. We must look for regular entity manufacturers to cooperate, not only the price is reasonable and transparent, but also the after-sales service can be kept up with, and we can find people. Some customers covet cheap to find foreign trade bag company cooperation, early purchase of the machine is a lot cheaper, but later machine problems can not find service manufacturers, and other plate shears manufacturers are not the company's machine is not after-sales, this problem is difficult to deal with.

To sum up, the hydraulic shear plate procurement should be determined according to their own needs, if the thickness of the shear plate is less than 8 thick recommended to use the hydraulic pendulum plate shears, more than 8 thickness is recommended to purchase hydraulic gate type plate shears