Views: 3 Author: DURMAPRESS Publish Time: 2021-04-15 Origin: DURMAPRESS
QC11Y-20X6000 hydraulic plate shears Product details:
20mm thick 6 meters plate shears are divided into pendulum type and gate type two, general manufacturers suggest that the thickness of the plate is more than 10mm recommended to use the hydraulic gate type plate shearing machine shear effect is good, the machine model is: QC11Y-20X6000 hydraulic plate shears .In general, the equipment shear ordinary Q235 steel plate can be cut 20mm thick, but for some manganese steel, high hardness alloy steel can not be cut to 20mm thick.The specific choice of which type of hydraulic plate shears, not only relates to the price of the plate shearing machine, but also affects the use efficiency of customers.So if the customer is not sure which model to choose, you can directly contact the company manager Wang: Candy<email@example.com>
1. Rectangular lower blade can be cut with four cutting edges to extend the service life of the blade.
2. The table surface is equipped with a supporting knife holder, easy to adjust the blade.
3. The table surface is equipped with feeding ball, easy to operate.
4. The blade gap dispatching adopts the poleless dispatching mechanism to meet the shear needs of different plate thickness and material.
5. Scheduling shearing stroke can not only improve processing efficiency, but also realize the function of segmented shearing.
6. Automatic counting of cutting times reduces tedious counting work.
1. QC11Y-20X6000 hydraulic gate type plate shears _20mm thick 6 meters plate shears advanced integrated hydraulic system, reduce the pipeline installation, to ensure the high reliability and safety in the operation of the machine.
2. Press mechanism: a number of press cylinder installed on the front of the frame supporting plate after oil, the press head to overcome the tension of the tension spring after pressing, pressing the sheet material.After the shearing is completed, it is restored with the help of a tension spring.The size of the compression force increases with the increase of the thickness of the shear plate.
QC11Y-20X6000 hydraulic gate type plate shearing machine _20mm thick 6 meters plate shearing machine basic parameters:
Maximum thickness of plate can be cut Mm 20
The maximum width of the plate can be cut to Mm 6000
The cutting Angle is 0.5°-2.5°
Number of stroke on tool rest /min 5-----20
Rear stopper range MM20 -----1000
Motor power KW 5 5
The maximum working pressure of hydraulic system is Mpa 25
Deep throat 300
QC11Y-20X6000 hydraulic gate type plate shears _20mm thick 6 meters plate shears safety operation specification:
First, QC11Y-20X6000 hydraulic gate type plate shears before use to carefully read the "use manual", then check the circuit, oil circuit, the distance between the blade clearance, the tightness of the screws and nuts of the main key parts, especially to check the safety of the plate shears around the complete protective facilities and other conditions, find problems timely troubleshooting and solving.
Two, the use of the plate shearing machine to no-load operation for 1-3 minutes, prohibit two people together to shear a number of plates, to determine the normal operation of the machine can be processed.
Three, plate feeding is strictly prohibited to reach the foot of the pressing material to take, plate fingers from the knife edge of more than 200mm.
4. Do not put your hands and tools into the 20X6000 hydraulic sluice shearing machine to prevent safety accidents.
5. The thickness of the shear steel plate shall not exceed the effective range specified by QC11Y-20X6000 hydraulic gate type plate shearing machine _20mm thick plate shearing machine of 6 meters, in order to prevent accidents caused by damage to the machine tool and blade.
Six, shear narrow plate material, should be pressed on the shear plate a thick steel plate, so that the vertical pressure foot can be pressed firmly when the shear plate.
7. Adjust the clearance of upper and lower blade according to the thickness of the shearing plate material. The clearance of the blade shall not exceed 5% of the thickness of the plate, and the clearance of the inclined cutting shall not exceed 7%.
The edge of the blade should be kept sharp. If the edge is blunt or the notch is damaged, it should be polished or replaced immediately.
Nine, the feeding should be put straight, straight, stable, fingers can not be close to the knife edge and the foot.
Ten, QC11Y-20X6000 hydraulic gate type plate shearing machine _20mm thick 6 meters plate shearing machine in use, if found abnormal sound or see abnormal phenomenon, to immediately stop inspection, timely processing.
11. After the steel plate is cut off, the machine tool should be stopped before the steel plate is taken from behind the plate shearing machine, and the power supply should be disconnected to prevent the operation of the rear stopper connecting shaft or the movement of the plate shearing machine from causing casualties.
12. After cutting the board, disconnect the power supply and lock the power box.