Site icon DurmaPress

S 600 Series

The most powerful CNC controller in its class. Graphical programming at the highest level with a large 15 '' touch screen for maximum ease of use to get the most out of your machine.

General software functions

Numerical and graphical 2D programming with

automatic calculation of the Y-axis based on tool,

material and programmed angle as well as

automatic calculation of the position of the X, R or Z axis

Graphical 2D tool programming

Automatic calculation of the bending force limitation based on the max. Load capacity of the tools

Automatic calculation of the crowning

Automatic calculation of stock size

Automatic management of folded sheets

Automatic calculation of the bending radius curvature for large bending radii

Programmable workpiece counter

Switch between mm / inch

Windows®-like user interface

Network connection / remote maintenance

Optional software features

Graphical 2D workpiece programming

2D representation of the machine structure, the workpiece and the tools

Automatic calculation of bending order

Angle correction database with the ability to apply the corrections to the angle, material or tool. Corrections are automatically loaded into the new programs

3D Profile View (Extrusion Viewer)

Interface for LED strips from Wila and Esautomotion

Mitutoyo goniometer interface for correcting the bending angle (cable included)

General features

Programmable axes and auxiliary functions

Control of hydraulic axes with proportional or servo valves, DC and AC motors, brushless motors and converters, both traditional analog and fieldbus (Sercos, CAN, Mechatrolink, etc.)

Auxiliary axis management, connection to a robot

with synchronization of robot / press programs,

coupled presses (tandem)

Integration of a safety PLC (Pilz, Fiessler, Lazer Safe, MCS)

Modifiable PLC (IEC 61131-3) with function blocks both in STL and "C"

Customizable alarm management

Hardware features

24 VDC power supply, 50 W max.

CPU VIA Eden® X1 1.06 GHz, 1 GB RAM

15.6 '' TFT LCD display with 1366x768 WSVGA

resolution, glare protection

Resistive single touch

128 MB SSD (Flash Disk)

Ergonomic housing with external USB port

Integrated machine operator panel for hard keys (optional)

Hardware interfaces

2x RS-232

1x Ethernet 10/100 MBit network connection

1x CANopen (2x CANopen optional)

2x USB 2.0

Program memory and tool memory

SSD flash disk with space for at least 7,000 programs and 7,000 tools

Axes

Maximum 6 CNC axes

In addition, control of the hydraulic crowning or Wila inputs with single-ended incremental encoder (5 V TTL) or Line Driver (RS 422)

Max. Encoder input frequency 500 kHz

Inputs and outputs

32 opto-isolated digital inputs PNP 24 VDC

32 opto-isolated digital outputs 24 VDC,

0.7 A, short-circuit proof

4 analog inputs 12Bit (0-5V, 0-10V)

2 analog outputs 12Bit (0-10V)

Direct control for pressure valve and crowning valve (max 3 A)

Direct control of proportional valves for Y1 and Y2

with and without feedback (maximum 2.8 A)

I / O expansion via ESAring interface with up to 128 digital inputs, 128 digital outputs, 8 analog inputs, 8 analog outputs (optional)

Offline Software

Free offline software for Windows®

Analogous to the programming software of the CNC control on the machine

Complete bending simulation

 

Exit mobile version