WC67K series bending machine description
WC67K series hydraulic plate bending machine can be configured with various types of special NUMERICAL control system: DA41, E21+, MD20, etc. With multi-step programming function, it can realize automatic operation and continuous positioning of multi-step program, and realize automatic and accurate adjustment of position of rear stopper and slider. Bending count, real-time display of processing number, power off memory of the rear stopper slide position, program and parameters; The rear stopper adopts imported ball screw and linear guide rail to ensure the positioning accuracy of the rear stopper and higher machining accuracy.
1, the frame adopts the whole steel welded structure, through normalizing and high-frequency vibration to eliminate the internal stress, ensure the overall accuracy of the machine tool, has excellent stiffness, has excellent anti distortion, anti tilt ability. The thickened working table and the thickened sliding block make the machine have high rigidity, so the deformation of the sliding block and the working table is very small when bending, and the workpiece has excellent straightness and Angle consistency.
2, according to the German DIN55222T2-80 standard design.
3, hydraulic system adopts integrated control system, reduce pipeline installation, the use of imported sealing ring, improve the stability of the machine, beautiful and simple appearance.
4. The main cylinder piston of the machine adopts aerospace technology - surface nickel-phosphorus treatment, its hardness can reach HRC60 or more, and the guide sleeve of relative movement of the piston adopts its own lubricated zn-base wear-resistant alloy, which can make the cylinder in good working condition for a long time.
5, the use of torsion shaft synchronization, mechanical block, reliable, economic, high precision.
6. The distance of the rear stopper and the stroke of the upper slider are automatically adjusted by the NUMERICAL control system, and can also be manually adjusted for convenient operation.
7. The upper die is equipped with winding compensation mechanism.
Two, CNC system functions: Taiwan Delta touch screen Chinese NUMERICAL control system (or the Netherlands Delem NUMERICAL control system) :
1, with one-way and two-way positioning function, can effectively eliminate the lead screw gap.
2, with the function of material selection, avoid the interference between the material stopper and the workpiece, reduce wear, improve positioning accuracy.
3, with automatic or manual search reference point function. With power off position memory function, the parameters, position and program for on-site protection.
4, with multi-step processing programming function, can realize multi-step operation, complete multi-step parts one-time processing, improve production efficiency. 5, with one shaft servo motor automatic control slider up and down stroke adjustment, the other shaft servo motor control rear stopper.
Three, the main configuration:
1. The main seals of the oil cylinder are produced by Japanese Warka Company.
2. The main parts of the electrical box are produced by Schneider in France.
3. All hydraulic systems are controlled by cartridge valves, and the main hydraulic components are made by German HOERBIGER company
4, hydraulic pump adopts aerospace standard low noise internal gear pump.
5. The oil cylinder processed by the specialized factory and the sealing ring imported in complete sets can overcome the phenomenon of oil leakage.
6, the use of Taiwan HIWIN linear guide rail and ball screw.
7. The hydraulic system adopts German EMB pipeline joint to ensure the stability of the hydraulic system in long-term operation.
0086 555 8327689