The workpiece cut by 3015 fiber laser cutting machine has burr treatment and characteristics

Views: 10     Author: DURMAPRESS     Publish Time: 2021-10-28      Origin: DURMAPRESS


The workpiece cut by 3015 fiber laser cutting machine has burr treatment and characteristics

Reason one: 3015 fiber laser cutting machine produces laser beam focus up and down the deviation, resulting in energy does not just converge on the workpiece, the workpiece is not fully vaporized, so that the slag production increased, not easy to blow off, so that it is easier to produce burrs.

Solution: Adjust the position of the laser beam focus, according to its offset position, adjust to a better state.

Cause two: the output power is not enough to effectively vaporize the metal, resulting in excessive slag and burr.


Solution: check whether the work of the laser cutting machine is normal. If not, it needs to be repaired and maintained in time. If so, check that the output values are correct.

Reason three: the cutting line speed is too slow, destroy the surface quality of the cutting surface, produce burr.

Solution: Adjust and improve the cutting line speed in time, so that it reaches the normal value.

Reason four: The purity of the auxiliary gas can not meet the required standards, but also make the workpiece burr.

Solution: Replace the auxiliary gas with higher purity.

Cause five: The equipment works for too long, making the equipment in an unstable working state, which also leads to the generation of burrs.

Solution: close the laser cutting machine, after a period of time to restart and move again, so that it gets a full rest.


1. Flexibility

Fiber laser cutting machine can cut any pattern on the metal pipe, and laser can cut in any direction Angle, for more and more personalized processing to provide strong and favorable technical support, and the first cutting does not need to open the mold, reduce the cost of traditional equipment to open the mold for the first time.

Ii. Accuracy

Compared with flame cutting, plasma cutting, water cutting and other traditional processing equipment, laser cutting metal materials precision is much higher. At the same time, different materials may have small telescopic deformation in the process of processing, and the laser pipe cutting machine can be flexibly adjusted according to these deformation, which is also beyond the reach of many traditional processes.

Fiber laser pipe cutting machine is specially tailored for pipe processing customers, filling the gap of Pipe processing technology in China. It with convenient operation, high automation, high speed and high precision cutting, to adapt to the need, and many other advanced industrial production in large quantities, be the first choice of the equipment industry tube processing products, has been used successfully residents fitness equipment, agricultural machinery, pipeline, engineering machinery, automobile manufacturing, special motor, electrical appliance manufacturing, etc. Various kinds of metal pipe processing industry.


Powerful cutting function, can cut square pipe, round pipe, rectangular pipe and all kinds of special-shaped pipe. It adopts rack and pinion transmission structure, pneumatic clamping chuck and rotary pipe cutting mode, with high centering accuracy and machining accuracy. The machine is refined after annealing to eliminate the internal stress, which better solves the stress caused by welding and machining, thus improving the rigidity and stability of the equipment. Better stability and longer service life. Excellent processing system, friendly interface, easy to operate, and can be real-time feedback to the processing status, to ensure the orderly processing.

Contact Us




 0086 555 8327689

 +86 18325572889




Copyright 2021 Maanshan Durmapress Machinery Technology Co., ltd. All rights reserved