Performance characteristics of wc67y hydraulic press brake:
1. The host machine is equipped with CNC series of wc67y hydraulic press brake;
2. Multi-cloth programming function, can realize the automatic operation of multi-step program, continuous positioning, automatic adjustment of rear stopper and sliding position;
3. Bending counting function, hydraulic plate bending machine, real-time display of processing number, power off memory back stopper slider program and parameters;
4. The rear stopper can adopt imported ball screw and linear guide rail to ensure the positioning accuracy of the rear stopper and higher machining accuracy;
The company mainly produces steel industry tools, accessories, CNC shearing machine, bending machine, shredding machine. Die of bending machine, blade of plate shearing machine. Slitting mechanical blade, printing and packaging mechanical blade, bending machine factory, plastic crushing mechanical blade, paper carton mechanical blade, slitting blade, etc., products are used in printing, paper, packaging, plastic, rubber. Food, textile. Hardware, electrical appliances, Ma 'anshan bending machine, chemical, automation equipment and other fields.
There are many ways to automate bending. If you use a 6-axis robot bending system, you should focus on how to program, cut and stack the robot
Activity, as well as intelligent bending for automatic compensation and confirmation. Currently, bending automation can check and confirm conditions during bending and bending, but after bending.
There is almost no automatic inspection of finished products, so the application of automatic and semi-automatic bending after almost no automatic inspection of finished products, so the application of automatic and semi-automatic bending
It will still take some time.
The bending machine is an important equipment for the bending and forming of the workpiece in the sheet metal industry. Its function is to press the steel plate into various shapes according to the process needs. Such as the hydraulic sheet metal bending machine structure diagram shown below, is mainly composed of left and right column, workbench, beam frame, oil cylinder fixed on the upright post, around the slider and the oil cylinder piston connection, movement up and down the fixed to the column on the guide rail, lower die is fixed on the workbench, the lower upper die is installed on the slider, hydraulic system, electrical system instructions are given, under the influence of oil cylinder, The slide block drives the upper die down and the lower die to close the sheet bending. Left and right column, workbench and slider (hereinafter referred to as three pieces) is the key parts of the bending machine, the sum of the weight of the three pieces account for 70%~80% of the total weight of a bending machine. Its strength and rigidity directly determine the machine operation accuracy, service life, and the accuracy of the workpiece.