Availability: | |
---|---|
Quantity: | |
DMP Series
Durmapress
8462419000
Convenient materials loading and unloading. Air cooling without environment pollution. 3+1 axis CNC servo control to realize fully automatic operation.
High pressure, reliable firmly tight force, low noise and small energy consumption. Adopt tin bronze helical gear made by #45 forging steel.
QH silent guide rail transmission, the movement speed can be adjusted. The worktable has self-healing function. NC program design.
3+1 axis CNC servo control
QH silent guide rail
self-healing worktable
Main Features
(A) Y-axis system
The Y-axis consists of ECMA-F21830 AC servo motor,star reducer, timing belts, synchronous wheel, high-precision gear rack and pinion, linear guide parts.
Its function is that the servo motor drives the blades move straightly on a linear guide through the star reducer together with fine gear, to provide the V groove power.
(B) X-axis systems
The X-axis consists of E21320 AC servo motor, timing belts, synchronous wheel, ball screw, linear guide,backgauge rack, draggingclamps and other component parts.Its function is that servo motor drives the backgauge rack move straightly on a linear guide through timing belts and synchronous wheel driving ball screw, to provide precise positioning power to the the backgauge dragging clamps.
(C) Z-axis system
The Z-axis consists of C20604 AC servo motor, timing belts, synchronous wheel,ball screw, blade and other parts. Its function is that the servo motor drives the blade move straightly on a linear guide through timing belts and synchronous wheel driving ball screw ,to provide the blade precise positioning power.
(D) The pneumatic system
The pneumatic system were divided into two groups:the backgauge clamping tool which provides the clamping force to drag and pressing tool pneumatic system which provides the pressing force before V Groove.which provides the clamping force to drag.
(E) Electrical control system
The electrical control system consists of the PLC, driver, touch screen, electronic control components, electrical cabinets and other accessories. The electrical cabinet is installed within wallboard of the machine, easy for maintenance and protection.Through the touch display, you can make full use of the equipment.
STANDARD COMPONENTS
CNC system - Japan
Hydraulic system - Taiwan
Frequency converter - Mitsubishi
Servo motor - Mitsubishi
Seal ring - VALQUA,Japan
Motor - SEW
Air switch - Schneider
Contactor - Schneider
Breaker and button - Schneider
Relay - Schneider
Blades - KORLOY,Korea
Linear guide - HINWIN, Taiwan
Wire - IGUS, Germany
No. | Name | Manufacturer Name |
1 | CNC Controller | HUST-Taiwan |
2 | Servo Motor | Panasonic - Japan |
3 | Servo Drive | Panasonic - Japan |
4 | Speed Reducer | LI MING-Taiwan |
5 | High-precise Ball Screw | ABBA - Taiwan |
6 | High-precise Linear Guide Rail | HIWIN-Taiwan |
7 | Touching Ball Bearing | NSK - Japan |
8 | Grooving Cutter | SECO - Sweden |
9 | Electrical Element | Schneider - France |
10 | Power Cable | IGUS - Germany |
11 | Electrical Element | AIRTAC - Taiwan |
12 | Air Cylinder | AIRTAC-Taiwan |
13 | Rack | YYC- Taiwan |
14 | Gear | YYC-Taiwan |
15 | Operation Controller | HUST-Taiwan |
16 | Safety Standards | ■CE nCSA BNR-12 dOSHA |
1 | Model | DMP1250-3200 | DMP1250-4000 | DMP1500-3200 | DMP1500-4000 |
2 | Plate thickness | 0.4-6mm | 0.4-6mm | 0.4-6mm | 0.4-6mm |
3 | Plate length X Width | 1250x3200mm | 1250x4000mm | 1500x3200mm | 1500x4000mm |
4 | Grooving speed /speed is changeable or not | 5M-70M/min ( The speed is changeable ) | 5M-70M/min ( The speed is changeable ) | 5M-70M/min ( The speed is changeable ) | 5M-70M/min ( The speed is changeable ) |
5 | Feeding speed | 0.5-20M/min | 0.5-20M/min | 0.5-20M/min | 0.5-20M/min |
6 | Min-setting unit in X -axis | 0.01mm | 0.01mm | 0.01mm | 0.01mm |
7 | Positioning precision in X-axis | ±o.o5mm | ±o.o5mm | ±o.o5mm | ±o.o5mm |
8 | Min-setting unit in Y -axis | 0.01mm | 0.01mm | 0.01mm | 0.01mm |
9 | Positioning precision in Y-axis | ±o.o5mm | ±o.o5mm | ±o.o5mm | ±o.o5mm |
10 | Min-setting unit in Z-axis | 0.01mm | 0.01mm | 0.01mm | 0.01mm |
11 | Positioning precision in Z-axis | ±o.o3mm | ±o.o3mm | ±o.o3mm | ±o.o3mm |
12 | X-axis motor power | 1.5KW | 1.5KW | 1.5KW | 1.5KW |
13 | Y-axis motor power | 3KW | 3KW | 3KW | 3KW |
14 | Z-axis motor power | 0.4KW | 0.4KW | 0.4KW | 0.4KW |
15 | Workbench planeness | ±o.o2mm | ±o.o2mm | ±o.o2mm | ±o.o2mm |
16 | Feeding Way | Back feeding | Back feeding | Back feeding | Back feeding |
17 | Workbench is replaceable or not | Replaceable ( Exchangable as well ) | Replaceable ( Exchangable as well ) | Replaceable ( Exchangable as well ) | Replaceable ( Exchangable as well ) |
18 | Workbench is quenched or not | Yes | Yes | Yes | Yes |
19 | Number of cutter | 3 PCS | 3 PCS | 3 PCS | 3 PCS |
20 | Max.Depth for one-time Grooving | 1.0mm | 1.0mm | 1.0mm | 1.0mm |
21 | Max. Grooving Depth | 3.0mm | 3.0mm | 3.0mm | 3.0mm |
22 | Cooling sprayer | Have | Have | Have | Have |
23 | Outline Diemension | 5000*2500*2100mm | 5800*2500*2100mm | 5000*2750*2100mm | 5800*2750*2100mm |
24 | Weight | 9500KGS | 10500KGS | 10200KGS | 11200KGS |