E-mail Us: info@durmapress.com
1 set of standard hardened and ground rolls (special steel)
All rolls Planetary/Gear – Hydro motor Driven
Side supports are suitable for angle iron bending leg in -Leg Out
Portable control panel
Horizontal and Vertical optional
Body constructed of stress-relieved steel
Overload protection on hydraulic and electrical systems
Bottom rolls hydraulically adjustable with digital readout
Full function,various profile can be bent by replace the mold
NC or CNC can optional by customer
CE certificate
Quantity: | |
---|---|
Adopt streamline design originating European, tempering furnace treatment of steel machine frame to eliminate machine stress
Three shafts are driven by hydraulic motor and split shaft of planetary reducer
The shafts are made by special high-strength steel through hardening and polishing
Standard hardening die
With horizontal and vertical two kinds of working modes
The position of upper roller is fixed, but two lower rollers can make arc movement around the fixed center together or separately.
Supporting devices are set on the roller both sides to improve the bending quality of asymmetric section bar
Moveable CNC workbench
NO. | Accessory Name | Model / Manufacturer Others | Others |
Configuration | |
1- | Controller | ■ CNC Controller |
Standard | ||
2- | Electrics | Schneider-France | Travel switch & Limit switch | ||
3- | Main Motor | Siemens-Germany | |||
4- | Hydraulic System | Bosch Rexroth- Germany | |||
5- | Oil Pump | Sunny- USA | |||
6- | Sealing Ring | PAEKER-USA/NKO-Japan | |||
7- | Oil Pipe | High-pressure Pipe | |||
8- | Standards | ■ CE □CSA ■NR-12 □OSHA |
W24S Series | ||||||||||||||
Technical | Parameters | 6 | 16 | 30 | 45 | 75 | 100 | 140 | 180 | 260 | 320 | 400 | 500 | |
Max. Bending Section Modulus | 6 | 16 | 30 | 45 | 75 | 100 | 140 | 180 | 260 | 320 | 400 | 500 | ||
Rolling Speed(m/min) | 6 | 5 | 4 | |||||||||||
Yield Strength (Mpa) | S=450 | |||||||||||||
Angle Inside Bending | Max. Bending Size(mm) | 40X5 | 70X8 | 80X8 | 90x10 | 100X10 | 120X12 | 140X16 | 150X16 | 160X16 | 180X14 | 200X18 | 200X20 | |
Angle Outside Bending | Max. Bending Size(mm) | 50X5 | 80X8 | 90X10 | 100x10 | 120X12 | 140X16 | 150X16 | 160X16 | 180X14 | 200X18 | 200X24 | 250X25 | |
U-steel Outside Bending | Max. Bending Size(mm) | 8 | 12 | 16 | 20 | 25 | 28 | 30 | 32 | 36 | 40 | 45 | 50 | |
U-steel Inside Bending | Max. Bending Size(mm) | 8 | 12 | 16 | 20 | 25 | 28 | 30 | 32 | 36 | 40 | 45 | 50 | |
Flat Horizontal Bending | Max. Bending Size(mm) | 100X18 | 150X25 | 180X25 | 200x30 | 220X40 | 250X40 | 280X50 | 300X50 | 330X50 | 360X60 | 400X75 | 500X76 | |
Flat Vertical Bending | Max. Bending Size(mm) | 50X12 | 75X16 | 90X20 | 100x25 | 110X40 | 120X40 | 150X40 | 180X30 | 190X40 | 190X50 | 200X50 | 200X60 | |
Round Pipe | Max. Bending Size(mm) | 42X4 | 76X4.5 | 89X5 | 89x8 | 114X5 | 159X5 | 186X6 | 168X8 | 219X8 | 245X8 | 273X8 | 323X10 | |
Round Steel | Max. Bending Size(mm) | 38 | 52 | 62 | 75 | 85 | 90 | 100 | 110 | 120 | 135 | 150 | 160 | |
Square Steel | Max. Bending Size(mm) | 45X3 | 60X4 | 70X4 | 80x6 | 90X8 | 100X10 | 125X10 | 140X10 | 150X10 | 165X10 | 180X12 | 200X12 |
With no distractions and keep focus, we strive to improve our products, lead the way of innovation…
View More >