WE67K-135T3200 Hydraulic Press Brake machine normal operation should pay attention to safety matters

WE67K-135T3200 Hydraulic Press Brake machine is one of the common equipment in modern mold processing. Most CNC bending machine is the main way of working on the piston press, its driving force has characteristics, specific and bending machine mold production process has a great relationship. But it is undeniable that in normal use, the matters needing attention include the following:

WE67K-135T3200 Hydraulic Press Brake machine is characterized by two parallel movement of the working hydraulic cylinder to form pressure, this pressure is vertical downward, pressure can drive the bending beam of the mold for bending work. The typical bending process of the upper bending beam has several stages and links, including downward movement, static state and decompression, return and so on:

Downward movement

The downward closing movement of ordinary bending machine is generally the use of free fall, that is, through the weight of the bending machine itself to produce movement; But the production of CNC bending machine mold is not so, but the use of hydraulic cylinder rodless cavity to produce pressure, so the fast forward speed can reach 250mm/s, suitable for the production of strong mold.

Fast forward motion from the top dead point, at the end of the end can be through a short brake, for example, bending plate distance after the end, specific can be adjusted according to the different requirements of mold manufacturing.

Stationary state

Bending machine at rest position is the upper bending beam on the dead point. This state is designed to produce uncontrolled downward motion.

The depressurization of the rodless cavity or after the holding time when the bottom dead point is reached can further improve the accuracy of the workpiece. Pressure maintenance and decompression can be directed by proportional directional valves. According to the need to customize the running time, decompression can be as short as possible, but the decompression is not allowed to be too steep, as smooth as possible.

The return trip

A large return velocity is involved, which depends mainly on the pump flow rate and the rod cavity bearing area of the hydraulic cylinder. In general, if the closer to the speed, return efficiency is high.The return journey also requires synchronization.

Stamping and bending

One stage is stamping and bending, which is a key link of bending machine mold production, but also a link, stamping speed is limited by the oil supply of the oil pump, but also by the proportional valve direction valve to adjust the manual intervention.

CNC bending machine mold production process of the main link about these 5 processes, each process involves a number of factors, including the quality and parameters of the machine itself, but also including human intervention, may affect the production and production of bending machine mold.