What are the advantages of High Power Laser Cleaning Machine for rust removal

Rust is the inevitable existence of some metal products, in order to make the product beautiful and continue to use, it is necessary to remove rust. Laser cleaning machine is born for this purpose, laser cleaning machine rust removal effect is significant, can effectively remove rust, what are its advantages?

High Power Laser Cleaning Machine

1, laser cleaning machine rust removal is non-contact, can be transmitted through optical fiber, combined with robot or manipulator, convenient remote operation, can clean the parts that are not easy to reach by traditional methods, is an excellent choice for ship, aircraft, weapons and other cleaning and maintenance.

2. In addition to rust removal, laser cleaning machine can also clean different types of pollutants on the surface of various materials to achieve a high degree of cleanliness. It is a new application of surface engineering treatment. Pulsed laser is more suitable for titanium alloy surface cleaning and descaling, stainless steel weld pass cleaning, stainless steel weld spot cleaning, precision parts before and after welding surface cleaning, flange cleaning; Ultraviolet lasers are suitable for cleaning large components.

3, laser cleaning machine through the threshold calculation parameter setting, no contact, no grinding, no thermal effect, no damage to the base material body, easy to operate, especially suitable for mold, cultural relics cleaning.

4, laser cleaning machine rust removal does not need chemical solution, no chemical cleaning caused by environmental pollution, is the replacement of pickling phosphating new technology, new process, new method.

5, laser cleaning machine after rust cleaning waste form solid powder, small volume, easy to deal with, do not cause pollution to the environment, green environmental protection, is the trend of industrial cleaning reform and development.

6, pickling, sandblasting and other traditional cleaning process because of its inevitable formation of visible damage to the surface of the substrate, is not suitable for the cleaning treatment of 30mm below the sheet material, and the laser cleaning machine is to show their skills.

7, laser cleaning machine has a strong flexibility and controllability, through different parameter Settings, the same laser cleaning machine can make the surface rough to improve the adhesion; You can set different laser power, frequency, aperture, focal length and so on by preset effect, do not exceed the limit as little as possible, only clean the required range and intensity, improve efficiency and reduce costs.

8, laser cleaning function can effectively clean micron-level pollution particles, to achieve controllable fine cleaning, suitable for precision instruments, precision parts of the clean treatment.

9, laser cleaning machine rust removal can be used for a long time, does not need consumable materials, only a small amount of electricity, low maintenance and operation costs, can easily achieve automatic operation, a unlimited cycle of use.

10, laser cleaning machine belongs to the physical dry cleaning, replace the traditional industrial cleaning on the waste of water resources, replace the traditional surface treatment needed cleaning fluid, cleaning agent, eliminate ODS ozone depleting substances, low carbon water saving and energy saving.

In the environmental protection laws and regulations requirements are more and more strict, people's awareness of environmental protection and safety is increasing today, laser cleaning machine rust removal can reduce the use of chemical agents and mechanical methods of cleaning, its efficient, environmental protection, cleaning clean characteristics, will be more and more widely used.

Laser Cleaning Machine equipment features:

1. Independent research and development has reached the international advanced level, using YAG laser and pulse Q switching technology to produce laser cleaning machine.

2, non-contact test cleaning, no damage to the parts matrix.

3, precise cleaning, can realize precise position, precise size selective cleaning.

4, Do not need any chemical cleaning liquid, no consumables, safe and environmental protection.

5, the operation is simple, can be powered on, can be hand-held or with the manipulator to achieve automatic cleaning.

6, cleaning efficiency is very high, save time.

7, laser cleaning system is stable, almost without maintenance.

Application industries for the mold industry, automobile manufacturing, shipping, food and comfort processing, sewage treatment, rubber tires, petrochemical and other industries.

The principle and method of laser cleaning, laser is characterized by high directivity, absolute, high coherence and high brightness. By focusing the lens and Q-switching, the energy can be concentrated into a very small space and time range. In the laser cleaning process, the following characteristics of the laser are mainly used:

1, the laser can achieve a high concentration of energy in time and space, focusing the laser beam near the focus can produce thousands of degrees or even tens of thousands of degrees of high temperature, so that the dirt instantaneous evaporation, gasification or decomposition.

2. The divergence Angle of the laser beam is small and the direction is good. Through the concentrating system, the laser beam can be focused into spots of different diameters. Under the condition of the same laser energy, the energy density of the laser beam can be adjusted by controlling the spots of different diameters of the laser beam, so that the dirt is heated and expanded. When the expansion force of the dirt is greater than the adsorption force of the dirt on the substrate, the dirt will break away from the surface of the object.

3, the laser beam can generate ultrasonic waves on the solid surface, produce mechanical resonance, so that the dirt is broken off. Laser cleaning technology is to use the characteristics of the laser to achieve the purpose of cleaning. According to the optical properties of the substrate to be cleaned and the dirt to be cleaned, the laser cleaning mechanism can be divided into two categories: one is that the absorption coefficient of the laser energy of a certain wavelength by the cleaning substrate (also known as the parent) and the surface attachment (dirt) has a great difference. Most of the laser energy radiated to the surface is absorbed by the surface attachment, which is heated or vaporized, or instantaneous expansion, and is driven by the formed airflow, away from the surface of the object, to achieve the purpose of cleaning. The substrate will not be damaged because it absorbs very little energy from the laser at this wavelength. For this kind of laser cleaning, choosing the appropriate wavelength and controlling the laser energy well are the keys to achieve safe and efficient cleaning. Another - in the clean substrate and surface attachment of the laser energy absorption coefficient difference is little, or the substrate is more sensitive to the formation of acid vapor coating heat, or coating after heating will produce toxic substances and other cleaning methods. This type of method usually involves a pulsed laser with a high power repetition rate hitting the surface to be cleaned, converting part of the beam into sound waves. When sound waves hit the underlying hard surface, the returning part interfered with the incident sound waves generated by the laser. The high-energy wave caused a small explosion of the coating. The coating was crushed into powder and then cleared by the vacuum pump, leaving the underlying substrate undamaged.

From the analysis of the method, there are four kinds of laser cleaning methods: 1, laser dry cleaning method, that is, the use of pulse laser direct radiation decontamination; 2, laser + liquid film method, that is, first deposit - layer of liquid film on the surface of the substrate, and then use laser radiation decontamination; When the laser is irradiated on the liquid film, the liquid film is heated sharply and produces explosive vaporization. The explosive shock wave loosens the dirt on the surface of the substrate. And fly away from the surface of the processed object with the shock wave to achieve the purpose of decontamination. 3, laser + inert gas method, that is, in the laser radiation at the same time, with inert gas blown to the surface of the substrate, when the dirt from the surface will be immediately blown off the surface by the gas, to avoid surface pollution and oxidation again; 4, the use of laser to loosen the dirt.

Laser cleaning equipment features:

1. Independent research and development has reached the international advanced level, using YAG laser and pulse Q switching technology to produce laser cleaning machine.

2, non-contact test cleaning, no damage to the parts matrix.

3, precise cleaning, can realize precise position, precise size selective cleaning.

4, Do not need any chemical cleaning liquid, no consumables, safe and environmental protection.

5, the operation is simple, can be powered on, can be hand-held or with the manipulator to achieve automatic cleaning.

6, cleaning efficiency is very high, save time.

7, laser cleaning system is stable, almost without maintenance.

Application industries for the mold industry, automobile manufacturing, shipping, food and comfort processing, sewage treatment, rubber tires, petrochemical and other industries.