Zy-h4020ft laser fiber cutting basic introduction and performance characteristics

Zy-h4020ft laser fiber cutting  Basic introduction

Laser cutting is the best cutting method in all kinds of cutting technology, compared with the traditional cutting, the advantage of laser cutting is: small thermal deformation, high cutting accuracy, low noise, no pollution, easy to achieve automatic cutting, processing cost is 50% less than mechanical processing.

Fiber laser cutting machine is the use of imported fiber laser output laser beam with high energy density, and focus on the surface of the workpiece, is the workpiece is the ultra-fine focus spot irradiation area instant melting and gasification, through the NUMERICAL control mechanical system to move the spot irradiation position and automatic cutting. It is a set of fiber laser technology, numerical control technology, precision machinery technology in one of the high-tech equipment.

Zy-h4020ft laser fiber cutting  performance characteristics:

1. Dual servo motor drive.

2. It has higher stability, higher speed and faster acceleration.

3. Full digital CNC servo motor communication.

4. The switching table reduces the loading and unloading time and improves the cutting efficiency.

5. The machine adopts gantry structure, imported reducer and high precision linear guide rail, smooth transmission, high precision, greatly improve the production efficiency of the machine tool.

6. The bed adopts integral welding structure, after annealing, rough processing, and then vibration aging treatment, can completely eliminate the stress of welding and processing, good rigidity, high precision, can keep a long time use without deformation.

7. The beam is made of aluminum alloy cast as a whole. After two high temperature annealing and rough machining, and then vibration aging, it is formed by high precision machining with good rigidity, light weight and good dynamic performance.

8. Imported high precision electronic control proportional valve, precise control of cutting auxiliary gas pressure, in order to achieve better cutting effect. It is more accurate and convenient than manual pressure regulating valve.

Fiber laser:

1. High photoelectric conversion efficiency, water and electricity saving cost.

2. Fiber laser has excellent thermal performance, high electro-optical efficiency, water and electricity saving, especially important is long-term maintenance-free use, can save a lot of maintenance costs and time, improve work efficiency.

3. Fiber laser cutting machine has obvious advantages in thin plate cutting.

Main configuration

1. Fiber laser power: 1500W

2. Cutting range: 3000mmX1500mm

3. Cutting plate thickness: carbon steel: 14mm, stainless steel: 5mm

Random standard configuration:

1) Fiber laser

2) the workbench

3) High-end CNC system

4) Laser water cooling unit

5) drawer type high pressure laser cutting head

6) Capacitive cutting head height detection system

7) laser cutting machine special automatic programming software

8) Electronic proportional valve precise air pressure control system

9) High pressure cutting system

10) Cutting auxiliary gas automatic conversion system

The basic principle of laser cutting machine

The principle of laser cutting is to focus the laser beam into a small spot of light, so that the focus of high power density, this is the beam input (by light energy conversion) heat far more than the material reflection, conduction or diffusion of the part, the material quickly heated to the temperature of gasification, evaporation formed holes. With the relative linear movement of the beam and the material, the hole forms a narrow slit

Laser cutting features:

1. Narrow slit, small deformation, high precision, fast speed, high efficiency

2 laser cutting is a kind of high energy, density and good controllability of contactless processing

3. Compared with punch press and plate shearing machine, it does not need mold, which saves the time of changing mold and reduces the processing cost. Can cut complex graphics.