Skip to content

The characteristics of 160T3200 CNC bending machine

(1) Viewpoint programming directly, with viewpoint compensation function 160T3200 CNC bending machine.

(2) Grating ruler real-time detection feedback correction, full closed-loop control, the positioning accuracy of rear stopper and slide block dead stopper is 0.02mm.

(3) The upper die adopts fast clamping device, and the lower die adopts oblique wedge deformation compensation structure.

(4) With multi-step programming function, can realize multi-active operation, complete multi-step parts one-time processing, improve the output power.

(5) According to user needs, imported hydraulic system with stable function and compact structure can be selected, and ball screw and synchronous belt can be used for rear stopper.

CNC bending machine how to fuel? Initial oil and ordinary bending machine, there is a small barrel of 20L hydraulic oil,

there is also a large barrel of anti-wear hydraulic oil about 170L, the trademark according to the machine tool manufacturer advocate selection.

The small bucket is light and the large bucket needs something. Open the oil tank cover of the bending machine,

clean and clean the sundry inside the tank, check whether the oil filter is in good condition,

and slowly pour the oil into the tank until the oil tank cover is closed at the place specified in the oil label.

Conditional word uses tanker fast clean. Then check the machine tool instructions, carefully observe whether there are other places such

as reducer need refueling. Find the smooth point, according to the smooth point specified oil injection smooth.

WeCreativez WhatsApp Support
Our customer support team is here to answer your questions. Ask us anything!
👋 Hi, how can I help?