Skip to content

How to program high quality hydraulic press brake?

High quality hydraulic press brake is hydraulic transmission, so its slider part by the slider, cylinder and mechanical block fine tuning structure

of the bending machine about the cylinder is fixed on the frame, through hydraulic piston to drive the slider up and down,

mechanical block by numerical control system control adjustment value.

CNC bending machine stroke adjustment, the use of must pay attention to the adjustment of stroke,

must be tested before folding check. Its upper die down to the bottom must ensure that there is a board degree of clearance.

Otherwise it will cause damage to the mould machine. Stroke adjustment is also electric quick adjustment.

Step on the foot switch to start bending, CNC bending machine mold and plate machine is different,

can be loosened at any time, loosen the foot will stop, continue to step down.

CNC analysis machine folding check slot selection, generally choose the plate thickness of 8 times the width of the notch.

For bending 4mm sheet metal, choose about 32 notches.

The coordination of all parts of the folding machine improves the efficiency, accuracy, maintainability,

versatility and safety of the system, and reduces the manufacturing materials. It is very convenient to use.

Therefore, in the usual use of the process, we must pay more attention to all aspects of the bending machine.

WeCreativez WhatsApp Support
Our customer support team is here to answer your questions. Ask us anything!
👋 Hi, how can I help?