Three-roll plate machine has mechanical and hydraulic: mechanical three-roll plate machine is divided into symmetric and asymmetric. The sheet metal can be rolled into a circle, arc and cone within a certain range
The workpiece.
Rolling bearing is a precision part of the three-roller bending machine, so it is required to be cautious when using it.
The correct use can not only achieve the desired performance effect, but also
It can prolong the running time of the bearing of the three-roller plate winder and improve its service life. Here's a look with xiaobian.
1, to prevent the corrosion of the bearing of the three-roller rolling machine, take the bearing directly by hand,
to fully wash the sweat on the hand, and coated with high-quality mineral oil before operation, in the rainy season and summer, especially pay attention to rust prevention.
2. The rolling bearing of the three-roller plate rolling machine should be carefully used when it is installed.
Strong stamping is not allowed, hammer is not allowed to hit the bearing directly, and pressure is not allowed to be transmitted through the rolling body.
3, the use of appropriate and accurate installation tools, try to use special tools, try to avoid the use of cloth and short fiber and the like.
4. Keep the bearing of the three-roller plate winder and its surrounding environment clean.
Even if the smile dust invisible to the naked eye into the bearing, it will increase bearing wear, vibration and noise.
Through the introduction of the above, I believe that we have a certain understanding of the service life of three-roll rolling machine bearings, more information about three-roll rolling machine please visit our website to view.
